Useful Tips

How to draw impressive three-dimensional letters

Pin
Send
Share
Send
Send


They talked about how to draw a 3d drawing with a pencil on paper. Video lesson for beginners and lovers. In this issue, the ABCs of drawing showed one interesting variety of 3d drawings. These are letters or numbers that fall deep into the sheet. Most likely, some of you have already seen similar works, because this topic is popular on the Internet. But it is unlikely that you have found video tutorials explaining how to draw such works.

So in this video, the goal is not only to show, but also to explain the process of drawing this 3d picture. It not only looks good, but it doesn’t require you much time to draw. Many of you will be able to master it in 20-30 minutes. And it's really great! As a bonus to information on drawing this 3D story about the general principle of creating such works.

MATERIALS AND OTHER:
For this drawing, you will need the following art materials: a sheet of A4 white paper, a pencil (2-6c), an eraser, a ruler, a shading tool and a black gel pen.
This video was released as part of the tutorial. This is such a video format on the ABC channel, where it is shown step by step and explained how to draw a specific drawing.

Simple letters in perspective

Let's start with simple letters that don't have any curves or sloping lines. For example, let's use the letter “T,” but any letter that consists of only straight lines will do. For example, “P”, “W”, “H”, “I”, “L” and so on. These letters are a great choice to start with.

The image above is the basis of our drawing. First, draw a horizon line and mark the vanishing point, and then draw the letter as it usually looks. This shape will serve as the basis for our three-dimensional letter.

Draw lines from each corner of the letter to the vanishing point. Please note that I did not join some of the corners, because I know for sure that we will not see them in the finished version. But if you are not sure, then it is better to draw lines from all angles, and then just erase the excess.

Now we need to determine how wide the letter will be in depth. To do this, draw the lines between the perspective lines at the right distance, which will be parallel to the original.

Pay particular attention to the corners of the letter in front. The corners on the back should be exactly the same as the original ones. In the figure above, both blue lines and orange are parallel.

This is the most important part of your drawing, so do not proceed to the next step until you achieve the ideal in this!

Our letter is not finished yet. Now we need to determine where to draw the last line that forms our “T”. Of course, you can do it by eye, but there are more accurate ways to do it.

To determine where the missing line is, simply paint over the shape of the letter using the shape we just painted.

Of course, this is additional work and requires a few temporary touches, but this allows us to determine where our final lines will be.

Now our “T” looks pretty good and we only need to remove the auxiliary lines.

Typically, such work requires time lines, which are used for calculations. It may seem to beginners that this is just a waste of time, but it is not. They really allow you not to make mistakes that might arise, we do everything by eye.

When you are completely confident in your work, you can simply erase them and that’s all.

Angular Letter Drawing

This is a little harder than simple straight letters consisting of simple perpendicular lines. For example, let's analyze the letter “K”.

Of course, we start by drawing a simple two-dimensional letter. I will draw it on the same plane as the previous letter, but you can place it anywhere, even on a new sheet.

Connect all corners of the letter to the vanishing point. This makes working with perspective easier.

Draw the back letter, keeping every corner and every parallel line. Remember that the shape of the letter exists both in front and behind.

Pay attention to the colored lines in the example above. Notice that the orange lines are parallel, just like the blue lines. This is important in order to draw the inclined parts of the letter.

Finally, erase all the extra and timelines, just like last time.

Image of round letters in perspective.

How to draw them? Before we start drawing full words, we need to find out one last thing: how to draw letters that contain curved lines! The letter G is a great example to start with.

As always, first draw a simple letter.

If you painted the previous letters, then you already know that the next step is to connect the corners of the letter with the vanishing point. But there are not many angles!

The question is what to do when the letter has more rounded details. But there is a simple trick for this that you can use:

  • Place the ruler at the vanishing point.
  • Keep it on the vanishing point and turn until it touches one of the curves of your letter.
  • Mark this place. Here we will draw a line of perspective.
  • Repeat this action for the other side to create a second perspective line.

It’s a little difficult to draw the back side of such a letter, with rounded lines. These lines make it difficult to draw perpendicular lines. Perhaps the easiest approach is to redraw the entire letter from the foreground to the back, of course, within the lines of perspective.

When the temporary letter is drawn, we can emphasize the part that we really need.

And after erasing unnecessary lines, we get a great letter “G”, made in the future with one vanishing point.

Practice drawing letters, and then see if you can draw whole words at once. Firstly, it’s quite funny and interesting, and secondly, you will gain more confidence for creating fantastic drawings! Good luck and success!

Draw a three-dimensional letter M with a charcoal pencil

How to draw M. Anamorphic illusion. An amazing trick for children and adults. Artistic drawing with vamos. Hungarian anamorphic artist Sandor Vamos creates an incredible trick.
Material used: Paper: A / 4, white. (Fabriano Elle Erre 220 g.) STABILO Pen 68. Dark gray. DERWENT charcoal pencil dark. Closed Eraser. Posted by Sandor Vamos. Hungarian. Copyright © New video 2017. Vamos. All rights reserved.

How to draw 3d drawings

To learn how to create images of volumetric figures on a flat surface, knowledge from the school curriculum on visual geometry will be useful, and this article will help, from which you will learn how to draw 3d drawings on two types of surfaces: on paper and on asphalt.
1. We take an ordinary sheet of paper, HB-pencil, eraser. For starters, we draw on the sheet the simplest geometric shapes, for example, let it be a triangle, a circle and a square. Now, recalling the geometry lessons (projecting drawings in three coordinate axes), we turn these figures into geometric bodies: a cone, a sphere, and a cube, respectively.

2. The second rule that needs to be learned in order to understand how to draw 3d drawings is the play of light and shadow. Indeed, first of all, the shadow cast by a figure makes this figure visually voluminous. Now, using the second rule, we choose the side from where the light will fall on our painted objects. And, on this basis, we begin to obscure them, remembering that the side of the figure that is closer to the alleged light source will be brighter than the opposite. In the process of shading, we move from the dark side to the light side. If you decide to direct the light source in front of the picture, then leave the middle of the subject light, gradually, evenly shading the shape to the contours. After that, draw a cast of shadows. Shadows from the figures will always fall from the opposite side of the light.
3. Having learned these first lessons and figured out how to draw 3D drawings using simple three-dimensional shapes as an example, you will gradually move on to creating more serious and complex three-dimensional images. And you can already try to dilute the color of black and white drawings.
4. Having learned the technique of spatial thinking and having mastered the necessary skills of three-dimensional drawing, you can easily figure out how to draw 3D drawings on other surfaces. To do this, use colored crayons and spray paints. A prepared sketch on paper is best broken into small equal squares with a grid. So it will be more convenient to draw, and the grid will allow you to transfer the image from paper to asphalt as accurately as possible.

There are a few tricks to keep in mind in order to understand how to draw 3d drawings on asphalt:
- The place for the drawing should be as even and prepared as possible (carefully cleared of possible small debris).
- To work on the image is best in cloudy or cloudy weather.
- And yet, since you have to rub the chalk with your fingers (to fix it), arm yourself with plastic bags in advance to protect the fingertips from abrasion.
- In the process of working on a drawing, you need to move from top to bottom. You should avoid drawing clear, even contours, and the background color of your drawing should, as far as possible, coincide with the color of the road surface on which you will work.
- It is also very important to guess the size of the occupied space, because 3d drawings have elongated proportions and impressive proportions. And, of course, do not forget that the image will appear three-dimensional from only one position you specify.
So, now you know how to draw 3d drawings on paper and asphalt, and we can only wish you good luck in this interesting business!
Source: fb.ru

Pin
Send
Share
Send
Send